
Product Details
Custom Die-Cut stickers are a fast and easy way to promote your business, brand or event.
Features
- 9-color CMYK + RGBO + White ink
- Same-day West Babylon printing
- Lab-tested 100+ wash durability
- Soft hand-feel, no plastic
Pressing instructions
How to Apply UV DTF Transfers (Step-by-Step)
Application is straightforward and sticker-like. Key: Clean surfaces + firm, even pressure.
Preparation:
- Clean the target surface thoroughly with isopropyl alcohol (70-99%) and a lint-free cloth to remove oils, dust, fingerprints, grease, or residue. Let it dry completely. For some plastics/wood, light scuffing + sealant can help.
- Work in a clean, well-lit area on a flat surface if possible.
- Tools: Squeegee (or credit card/finger for small pieces), scissors/cutter.
Applying on wood:
- Use single-sided UV transfers on wood. Apply like a sticker with firm, even pressure — no heat press.
- Best results are on smooth, sealed wood: finished hardwood, painted or clear-coated plaques, varnished signs, and sealed MDF.
- For raw or rough wood, sand it smooth (about 120 grit, then 220), wipe off the dust, apply a thin clear sealer or polyurethane, and let it fully cure. Stain alone is not a sealer.
- Clean the sealed surface with 70–99% isopropyl alcohol and a lint-free cloth, then let it dry completely.
- Place the design, then press firmly from the center out with a squeegee or firm card to push out air. Peel the clear carrier slowly at a low angle.
- Let it sit about 24 hours before heavy handling. For pieces that get touched a lot or sit outside, a clear topcoat over the transfer helps lock the edges.
- Do not apply to the food-contact face of a cutting board. Avoid waxed wood, which prevents the adhesive from sticking.
Shipping & returns
Weekdays: same-day shipping when ordered before 2pm ET (Mon–Fri). Saturdays: order by 12pm ET → ships Saturday for Monday delivery; Saturday pickup available (9:30am–2pm ET). Free shipping over $100 nationwide. 100% satisfaction guarantee — reprint or refund within 2 days.
Art upload recommendations
PNG with transparent background preferred. 300 DPI at print size. Max 22" wide x any length.